Publications

Publications

Home   Research   People   Journal Publications: 2007 | 2006 | 2005 | 2004 | 2003 | 2001 | 1998


Journal Publications

2007
29. Dinesh Kalyan Sundaram, Gamal Shehata, Clayton Neumann, Pal Molian and Pranav Shrotriya, “Design and Validation of a Hybrid Laser/Water-Jet System for Machining Brittle Materials.” Accepted to appear in Journal of Laser Applications, 2007.

28. A. Chandra, A. S. Mitchell, P. Shrotriya and D. A. Lucca, “Stress Assisted Dissolution of Biomedical Grade CoCrMo: Influence of Contact Loads and Residual Stresses.” Accepted to appear in Annals of CIRP, 2007.

27. G. Shehata, P. A. Molian, A. Bastawros and P. Shrotriya, “Surface finish and flexural strength of CO2 laser-cut alumina by evaporative and thermal stress fracture modes.” Transactions of the North American Manufacturing Research Institution, 35, Pg 391-400, 2007.

26. Jae-Joong Ryu and Pranav Shrotriya, “Onset of Fretting Corrosion in Biomedical Implants: Surface Roughness Evolution under Contact Loads and Corrosive Environment.” Accepted to appear in Experimental Mechanics, 2007.

25. Andrew Mitchell and Pranav Shrotriya, “Onset of nanoscale wear of metallic implant materials: Influence of surface residual stresses and contact loads.” Accepted to appear in Wear, 2007.

24. Christopher Barnes, Pranav Shrotriya and Pal Molian, “Water Assisted Laser Thermal Shock Machining of Alumina.” Accepted to appear in International Journal of Machine Tools and Manufacturing, 2007.

23. Honghui Yu, Pranav Shrotriya, Yanfei Gao, Kyung-Suk Kim, “Micro-plasticity of surface steps under adhesive contact: Part I, Surface yielding controlled by single-dislocation nucleation.” Accepted to appear in Journal of The Mechanics and Physics of Solids, In press 2007.

2006
22. Chris Barnes, Pranav Shrotriya and Pal Molian, “A Hybrid Laser/Water-Jet Cutting Process for Brittle Materials.” Transactions of North American Manufacturing Research Institute, Vol 34, Pg 111-119, 2006.

21. Wang, J; Shrotriya, P; Kim, KS. “Surface residual stress measurement using curvature interferometry.” Experimental Mechanics, 46 (1): 39-46, 2006.

20. Lou, J; Shrotriya, P; Allameh, S; Buchheit, T; Soboyejo, WO. “Strain gradient plasticity length scale parameters for LIGA Ni MEMs thin films.” Materials Science and Engingeering A-Structural Materials Properties Microstructure and Processing 441 (1-2): 299-307, 2006.

19. Zhou, J; Mah, J; Shrotriya, P; Mercer, C; Soboyejo, WO. “Contact damage in an yttria stabilized zirconia: Implications.” Journal of Materials Science-Materials in Medicine 18 (1): 71-78, 2006.

2005
18. Shrotriya, P. and N. R. Sottos. “Viscoelastic response of woven composite substrates.” Composites Science and Technology 65(3-4): 621-634. (2005)

17. Lou, J., P. Shrotriya and W. O. Soboyejo. “A cyclic microbend study on LIGA Ni microelectromechanical systems thin films.” Journal of Engineering Materials and Technology-Transactions of the Asme 127(1): 16-22. (2005)

16. Huang, M., X. Niu, P. Shrotriya, V. Thompson, D. Rekow and W. O. Soboyejo. “Contact damage of dental multilayers: Viscous deformation and fatigue mechanisms.” Journal of Engineering Materials and Technology-Transactions of the Asme 127(1): 33-39. (2005)

15. Chandrasekaran, S., J. Check, S. Sundararajan and P. Shrotriya. “The effect of anisotropic wet etching on the surface roughness parameters and micro nanoscale friction behavior of Si(100) surfaces.” Sensors and Actuators a-Physical 121(1): 121-130. (2005)

2004
14. Zhou, J., P. Shrotriya and W. O. Soboyejo. “Mechanisms and mechanics of compressive deformation in open-cell Al foams.” Mechanics of Materials 36(8): 781-797. (2004)

13. Zhou, J., P. Shrotriya and W. O. Soboyejo. “On the deformation of aluminum lattice block structures: from struts to structures.” Mechanics of Materials 36(8): 723-737. (2004)

12. Shrotriya, R. and N. R. Sottos. “Local time-temperature-dependent deformation of a woven composite.” Experimental Mechanics 44(4): 336-353. (2004)

11. Shrotriya, P., S. M. Allameh and W. O. Soboyejo. “On the evolution of surface morphology of polysilicon MEMS structures during fatigue.” Mechanics of Materials 36(1-2): 35-44. (2004)

2003
10. Zhu, Q., P. Shrotriya, N. R. Sottos and P. H. Geubelle. “Three-dimensional viscoelastic simulation of woven composite substrates for multilayer circuit boards.” Composites Science and Technology 63(13): 1971-1983. (2003)

9. Shrotriya, P., R. Wang, N. Katsube, R. Seghi and W. O. Soboyejo. “Contact damage in model dental multilayers: An investigation of the influence of indenter size.” Journal of Materials Science-Materials in Medicine 14(1): 17-26. (2003)

8. Shrotriya, P., S. M. Allameh, J. Lou, T. Buchheit and W. O. Soboyejo. “On the measurement of the plasticity length scale parameter in LIGA nickel foils.” Mechanics of Materials 35(3-6): 233-243. (2003)

7. Shrotriya, P., S. Allameh, S. Brown, Z. Suo and W. O. Soboyejo. “Fatigue damage evolution in silicon films for micromechanical applications.” Experimental Mechanics 43(3): 289-302. (2003)

6. Lou, J., P. Shrotriya, T. Buchheit, D. Yang and W. O. Soboyejo. “Nanoindentation study of plasticity length scale effects in LIGA Ni microelectromechanical systems structures.” Journal of Materials Research 18(3): 719-728. (2003)

5. Lou, J., P. Shrotriya, T. Buchheit, D. Yang and W. O. Soboyejo. “A nano-indentation study on the plasticity length scale effects in LIGA Ni MEMS structures.” Journal of Materials Science 38(20): 4137-4143. (2003)

4. Allameh, S. M., P. Shrotriya, A. Butterwick, S. B. Brown and W. O. Soboyejo. “Surface topography evolution and fatigue fracture in polysilicon MEMS structures.” Journal of Microelectromechanical Systems 12(3): 313-324. (2003)

3. Allameh, S. M., P. Shrotriya, A. Butterwick, S. Brown, N. Yao and W. Soboyejo. “Surface topography evolution and fatigue fracture of polysilicon.” Journal of Materials Science 38(20): 4145-4155. (2003)

2001
2. Shrotriya, P., N. R. Sottos and A. F. Skipor. “Residual stress development during relamination of woven composite circuit boards.” Journal of Composite Materials 35(10): 905-927. (2001)

1998
1. Shrotriya, P. and N. R. Sottos. “Creep and relaxation behavior of woven glass/epoxy substrates for multilayer circuit board applications.” Polymer Composites 19(5): 567-578. (1998)

Loading...