• Used for cutting wood only
• Vertical blade angle adjustable: –45°-+45°
• Built-in adjustable fences and clamps
• Crosscut up to 2” x 10” lumber

• Used for making either straight or curved cuts in wood and some plastics
• Table can be adjusted to a specific

• Multiple sanding surfaces for greater flexibility
• Not for use with aluminum
• Used to smooth corners, edges and for other light duty grinding

• Used for making holes in both wood and metal
• Digital spindle speed control
• Multiple clamping options for flexibility
• Many different styles of bits to choose from

• Removes a small amount of material from the surface of wood to produce a very smooth surface
• Removes 1/16” maximum per pass
• Feeds wood through machine to control removal rate

• Used to create intricate cuts in wood and some plastics
• Adjustable head speed for different materials
• Table adjusts to specific angle from the horizontal

• Used to remove a relatively large amount of wood from curved surfaces
• Different size spindles available to match the curve being sanded
• Spindle moves up and down as well as spinning to ensure

• Used for hollowing and carving wood and some plastics
• Collet capacity: 1/2”
• Main body stroke: 2 7/16”
• Many different router bits to choose from

SAWSTOP TABLE SAW

• Used for making many types of cuts in wood and some plastics
• Has specialized safety systems to reduce (not eliminate) the risk of serious injury
• Dado blades available for cutting channels in wood

• Used to create a curve in sheet    metal or wire with a minimum final diameter of 4 1/2”
• Not to exceed 50” wide 16 gauge mild steel
• 3” diameter rollers
• Adjustable for material thickness
• Can also roll wire in thicknesses of 0.513”, 0.407”, and 0.335”

• Used for manually machining 2D geometries, a 4th axis can be added as well
• Uses Millpwr controller with 2-axis auto-feed

• Used for manually machining 2D geometries, a 4th axis can be added as well
• Digital Readout with 3-axis auto feed
• Capable of running G-code

• Used for machining round symmetrical components
• Variable speed up to 1200 rpm
• Can machine stock from 3/64” to 12” diameter

• Used for rough-sizing metals and some plastics
• Multiple clamping options for flexibility
• Hydraulically powered table feed

• Used for cleaning and de-burring metal components
• Wire wheel used for removing rust, gasket material, etc.
• 2 different roughness stone wheels used for removing material from ferrous metals only
• Polishing wheel for making smooth surfaces or de-burring softer metals

• Used for smoothing edges and de-burring metal components
• Produces smoother finish than bench grinder

• Used for making holes in both wood and metal
• Digital spindle speed control
• Multiple clamping options for flexibility
• Many different styles of bits to choose from

• Used for rough sizing metal stock, especially long pieces
• Blade tilts for making miter cuts
• Adjustable feed rate and blade speed
• Multiple clamping options for flexibility

• Used to make clean accurate cuts in metal up to 3/4”
• Can cut up to 22” per minute when cutting mild steel
• Can be paired with PlasmaCAM CNC table

• Used to make accurate bends in square and round tubing
• Bends round tubing that is 1/2” to 2 1/2” diameter
• Bends square tubing that is up to 1 1/2” diameter
• Bends schedule 40 pipe up to 2” in diameter
• Uses 10 ton pneumatic cylinder

• Used to weld both steel and aluminum
• Welds steel that is 0.004” to 0.25” thick
• Welds aluminum that is 0.02” to 0.25” thick

• Welds steel that is 22 gauge up to 1/2” thick
• The Miller Spoolmatic Spool Gun can be attached for welding aluminum up to 1/4” thick

• Used for quickly machining complex components out of metal stock
• Machines 2D or 3D components
• Indexer may be installed to allow rotation of workpiece about a fourth axis in small increments
• Bed travels 30” x 20” x 20”
• Uses MasterCAM .NC code to program component geometry

• Used to make notches in sheet    metal
• Notches will be “V” shaped with 90° corner
• Sheet metal may exhibit some distortion after notching process

• Used for cutting, welding and brazing metals
• Produces rough edged cuts that must be finished by grinding or sanding
• Different tips available for different operations

• Used for punching, shearing, notching and bending mild steel thicker than sheet metal up to 5/8” thick
• Workpiece may be deformed slightly from the operation
• Has chart displaying maximum working limits for different materials
• Many different dies to choose from

• 12 Ton shop press for removing or installing press-fit components
• 20” inside width (between uprights)
• 8 3/4” horizontal support depth
• Hydraulic ram has 5” stroke

• Used for bending sheet metal and some plastics
• Maximum working thickness is 12 gauge mild steel

TENNSMITH SHEAR

• Used for cutting sheet metal and some plastics
• Cuts up to 16 gauge mild steel