Department of Mechanical Engineering

References - Vibration and Noise Control Laboratory

Select one of the following links to jump to Professor Wickert’s publications:

Books
Chapters in Books
Patents
Journal Publications
Conference Publications and Presentations

and then select a link to download the publication in PDF format (click here for information on viewing PDF files).

Books

   

  1. J.A. Wickert, An Introduction to Mechanical Engineering (Second Edition), Nelson-Thomson, ISBN 0534552978, 2005.  Portuguese translation with Cengage Learning Edicoes.  Korean translation with Cengage Learning Korea.  Chinese translation with Cengage Learning Far East.

  2. J.A. Wickert, Instructor’s Solutions Manual to Accompany “An Introduction to Mechanical Engineering (Second Edition),” Nelson-Thomson, ISBN 0495073121, 2005.

  3. J.A. Wickert, An Introduction to Mechanical Engineering, Brooks/Cole-Thomson Learning, ISBN 053439132X, 2003.

  4. J.A. Wickert, Instructor’s Solutions Manual to Accompany “An Introduction to Mechanical Engineering,” Brooks/Cole-Thomson Learning, ISBN 0534391338, 2004.  CD to accompany the Instructors Manual, ISBN 0534274064, 2003.

To top

Chapters in Books

  1. J.A. Wickert, “Vibration of Disc Brake Rotors,” Disc Brake Squeal:  Mechanism, Simulation, Test, and Prevention, SAE Press, 2006.

  2. J.A. Wickert, “Theory of Vibration:  Equations of Motion,” Encyclopedia of Vibration, Academic Press, pp 1324-1332, 2001.

  3. J.A. Wickert, “Lubrication and Lubricants,” The New Book of Knowledge, Grolier Educational Publishing, 1998.

  4. J.A. Wickert, D.N. Lambeth, and W. Fang, “Towards a Micromachined Dual Slider and Suspension Assembly for Contact Recording,” Concepts in Contact Recording, ASME Press, pp 27-39, 1992.

To top

Patents

  1. J.A. Wickert and A. Akay, “Damper for Brake Noise Reduction‑Brake Drums,” US Patent 6,112,865, September 5, 2000.

  2. J.A. Wickert and A. Akay, “Damper for Brake Noise Reduction,” US Patent 5,855,257, January 5, 1999.

To top

Journal Publications

  1. J.C. Collinger and J.A. Wickert, “Adaptive Piezoelectric Vibration Control with Synchronized Switching,” ASME Journal of Dynamic Systems, Measurement, and Control, in press.
  2. D.H. Choi, J.A. Wickert, and H.H. Yoo, “Effect of Manufacturing Tolerances on Dynamic Equilibria of Multibody Systems Undergoing Prescribed Rotational Motions,” Journal of Mechanical Science and Technology, 22, pp 1747-1756, 2008.
  3. V. Kartik and J.A. Wickert, “Parametric Instability of a Traveling Plate Partially Supported by a Laterally-Moving Foundation,” ASME Journal of Vibration and Acoustics, 130(5), pp 51006:1-8, 2008.
  4. X.W. Tangpong, J.A. Wickert, and A. Akay, “Finite Element Model for Hysteretic Friction Damping of Traveling Wave Vibration in Axisymmetric Structures,” ASME Journal of Vibration and Acoustics, 130(1), pp 11005:1-7, 2008.
  5. X.W. Tangpong, J.A. Wickert, and A. Akay, “Distributed Friction Damping of Traveling Wave Vibration in Rods,” Philosophical Transactions of the Royal Society, Series A, 366, pp 811-827, 2008.
  6. M.R. Brake and J.A. Wickert, “Frictional Vibration Transmission from a Laterally Moving Surface to a Traveling Beam,” Journal of Sound and Vibration, 310(3), pp 663-675, 2008.
  7. V. Kartik and J.A. Wickert, “Surface Friction Guiding for Reduced High Frequency Lateral Vibration of Moving Media,” ASME Journal of Vibration and Acoustics, 129(3), pp 371-379, 2007.
  8. E. Ervin and J.A. Wickert, “Repetitive Impact Response of a Beam Structure Subjected to Harmonic Base Excitation,” Journal of Sound and Vibration, 307(1-2), pp 2-19, 2007.
  9. E. Ervin and J.A. Wickert, “Experiments on a Beam-Rigid Body Structure Repetitively Impacting a Rod,” Nonlinear Dynamics, 50(3), 2007.
  10. K.J. Son, V. Kartik, J.A. Wickert, and M. Sitti, “An Ultrasonic Standing-Wave-Actuated Nano-Positioning Walking Robot:  Piezoelectric-Metal Composite Beam Modeling,” Journal of Vibration and Control, 12(12), pp 1293-1309, 2006.
  11. P.M. Lin and J.A. Wickert, “Corrugation and Buckling Defects in Wound Roll Processing,” ASME Journal of Manufacturing Science and Engineering, 128, pp 56-64, 2006.
  12. V. Kartik and J.A. Wickert, “Vibration and Guiding of Moving Media With Edge Weave Imperfections,” Journal of Sound and Vibration, 291, pp 419-436, 2006.
  13. M. Brake and J.A. Wickert, “Optimizing Vibration Isolation of Flex Circuits in Hard Disk Drives,” ASME Journal of Vibration and Acoustics, 127(2), pp 165-172, 2005.
  14. Y.M. Lee and J.A. Wickert, “Contribution of Support Means to Stresses Developed in Sheet Metal Coils,” ASME Journal of Manufacturing Science and Engineering, 126(3), pp 591-598, 2004.
  15. P.M. Lin and J.A. Wickert, “Analysis of Core Buckling Defects in Sheet Metal Coil Processing,” ASME Journal of Manufacturing Science and Engineering, 125(4), pp 771-777, 2003.
  16. J.A. Wickert, “Vibration of Flex Circuits in Hard Disk Drives,” ASME Journal of Vibration and Acoustics, 125(3), pp 335-342, 2003.
  17. Y.M. Lee and J.A. Wickert, “Width-Wise Variation of Magnetic Tape Pack Stresses,” ASME Journal of Applied Mechanics, 69(3), pp 358-369, 2002.
  18. J.Y. Chang and J.A. Wickert, “Measurement and Analysis of Modulated Doublet Mode Response in Mock Bladed Disks,” Journal of Sound and Vibration, 250(3), pp 379-400, 2002.
  19. Y.M. Lee and J.A. Wickert, “Stress Field in Finite Width Axisymmetric Wound Rolls,” ASME Journal of Applied Mechanics, 69(2), pp 130-138, 2002.
  20. K. Hyde, J.Y Chang, C. Bacca, and J.A. Wickert, “Parameter Studies for Plane Stress In-Plane Vibration of Rectangular Plates,” Journal of Sound and Vibration, 247(3), pp 471-487, 2001.
  21. J.Y. Chang and J.A. Wickert, “Response of Modulated Doublet Modes to Travelling Wave Excitation,” Journal of Sound and Vibration, 242(1), pp 69-83, 2001.
  22. J. Bae and J.A. Wickert, “Free Vibration of Coupled Disk-Hat Structures,” Journal of Sound and Vibration, 235, pp 117-132, 2000.
  23. M. Kim, J. Moon, and J.A. Wickert, “Spatial Modulation of Repeated Vibration Modes in Rotationally Periodic Structures,” ASME Journal of Vibration and Acoustics, 122, pp 62-68, 2000.
  24. J. Moon and J.A. Wickert, “Radial Boundary Vibration of Misaligned V-Belt Drives,” Journal of Sound and Vibration, 225(3), pp 527-541, 1999.
  25. A.V. Lakshmikumaran and J.A. Wickert, “Equilibrium Analysis of Finite Width Tension Dominated Foil Bearings,” ASME Journal of Tribology, 121(1), pp 108-113, 1999.
  26. M.B. Keshavan and J.A. Wickert, “Transient Discharge of Entrained Air From a Wound Roll,” ASME Journal of Applied Mechanics, 65(4), pp 804-810, 1998.
  27. K.I. Tzou, J.A. Wickert, and A. Akay, “Frequency Clusters in the Spectrum of Annular Cylinders,” ASME Journal of Applied Mechanics, 65(4), pp 797-803, 1998.
  28. J. Tseng and J.A. Wickert, “Nonconservative Stability of a Friction Loaded Disk,” ASME Journal of Vibration and Acoustics, 120(4), pp 922-929, 1998.
  29. K.I. Tzou, J.A. Wickert, and A. Akay, “In-Plane Vibration Modes of Arbitrarily Thick Disks,” ASME Journal of Vibration and Acoustics, 120(2), pp 384-391, 1998.
  30. A.A. Renshaw, C.D. Rahn, J.A. Wickert, and C.D. Mote, Jr., “Energy and Conserved Functionals for Axially Moving Materials,” ASME Journal of Vibration and Acoustics, 120(2), pp 634-636, 1998.
  31. A.V. Lakshmikumaran and J.A. Wickert, “Edge Buckling of Imperfectly Guided Webs,” ASME Journal of Vibration and Acoustics, 120(2), pp 346-352, 1998.
  32. J. Tseng and J.A. Wickert, “Split Vibration Modes in Acoustically-Coupled Disk Stacks,” ASME Journal of Vibration and Acoustics, 120(1), pp 234-239, 1998.
  33. M.B. Keshavan and J.A. Wickert, “Air Entrainment During Steady State Web Winding,” ASME Journal of Applied Mechanics, 64(4), pp 916-922, 1997.
  34. J. Moon and J.A. Wickert, “Non-linear Vibration of Power Transmission Belts,” Journal of Sound and Vibration, 200(4), pp 419-431, 1997.
  35. W. Fang and J.A. Wickert, “Determining Mean and Gradient Residual Stresses in Thin Films Using Micromachined Cantilevers,” Journal of Micromechanics and Microengineering, 6, pp 301-309, 1996.
  36. J.A. Wickert, “Transient Vibration of Gyroscopic Systems With Unsteady Superposed Motion,” Journal of Sound and Vibration, 195(5), pp 797-807, 1996.
  37. A.V. Lakshmikumaran and J.A. Wickert, “On the Vibration of Coupled Traveling String and Air Bearing Systems,” ASME Journal of Vibration and Acoustics, 118, pp 398-405, 1996.
  38. W. Fang, J. Tseng, and J.A. Wickert, “Asymptotic Treatment of Non-Classically Damped Linear Systems,” ASME Applied Mechanics Reviews, 48(11), pp 111-117, 1995.
  39. W. Fang and J.A. Wickert, “Comments on Measuring Thin Film Stresses Using Bi-Layer Micromachined Beams,” Journal of Micromechanics and Microengineering, 5, pp 276-281, 1995.
  40. W.T. Wu, J.A. Wickert, and J.H. Griffin, “Modal Analysis of the Steady State Response of a Driven Periodic Linear System,” Journal of Sound and Vibration, 183(2), pp 297-308, 1995.
  41. W.T. Wu, J.H. Griffin, and J.A. Wickert, “Perturbation Method for the Floquet Eigenvalues and Stability Boundary of a Periodic Linear System,” Journal of Sound and Vibration, 182(2), pp 245-257, 1995.
  42. W. Fang and J.A. Wickert, “Post-Buckling of Micromachined Beams,” Journal of Micromechanics and Microengineering, 4, pp 116-122, 1994.
  43. J.G. Tseng and J.A. Wickert, “On the Vibration of Bolted Plate and Flange Assemblies,” ASME Journal of Vibration and Acoustics, 116(4), pp 468-473, 1994.
  44. J.G. Tseng and J.A. Wickert, “Vibration of an Eccentrically Clamped Annular Plate,” ASME Journal of Vibration and Acoustics, 116(2), pp 155-160, 1994.
  45. J.A. Wickert, “Response Solutions for the Vibration of a Traveling String on an Elastic Foundation,” ASME Journal of Vibration and Acoustics, 116(1), pp 137-139, 1994.
  46. W. Fang and J.A. Wickert, “Response of a Periodically Driven Impact Oscillator,” Journal of Sound and Vibration, 170(3), pp 397-409, 1994.
  47. J.A. Wickert, “Free Linear Vibration of Self-Pressurized Foil Bearings,” ASME Journal of Vibration and Acoustics, 115(2), pp 145-151, 1993.
  48. J.A. Wickert, “Analysis of Self-Excited Longitudinal Vibration of a Moving Tape,” Journal of Sound and Vibration, 160(3), pp 455-463, 1993.
  49. J.A. Wickert, “Non-linear Vibration of a Traveling Tensioned Beam,” International Journal of Non-linear Mechanics, 27(3), pp 503-517, 1992.
  50. J.A. Wickert and C.D. Mote, Jr., “Response and Discretization Methods for Axially-Moving Materials,” ASME Applied Mechanics Reviews, 44(11), Part 2, pp 279-284, 1991.
  51. J.A. Wickert and C.D. Mote, Jr., “Traveling Load Response of an Axially-Moving String,” Journal of Sound and Vibration, 149(2), pp 267-84, 1991.
  52. J.A. Wickert and C.D. Mote, Jr., “Classical Vibration Analysis of Axially-Moving Continua,” ASME Journal of Applied Mechanics, 57(3), pp 738-744, 1990.
  53. J.A. Wickert and C.D. Mote, Jr., “On the Energetics of Axially-Moving Continua,” The Journal of the Acoustical Society of America, 85(3), pp 1365-1368, 1989.
  54. J.A. Wickert and C.D. Mote, Jr., “Current Research on the Vibration and Stability of Axially-Moving Materials,” Shock and Vibration Digest, 20(5), pp 3-13, 1988
  55. J.A. Wickert and C.D. Mote, Jr., “Linear Transverse Vibration of an Axially-Moving String-Particle System,” The Journal of the Acoustical Society of America, 84(3), pp 963-969, 1988.


To top

Conference Publications and Presentations

  1. J.C. Collinger, W.C. Messner, and J.A. Wickert, “Vibration Control with Magnetically Mounted Piezoelectric Actuators,” ASME International Mechanical Engineering Congress and Exposition, Boston, MA, October 31-November 6, 2008.  IMECE 2008-67369.
  2. J.A. Wickert, “Mechanics of Flexible Magnetic Media,” International Symposium on Mechanics of Slender Structures, Baltimore, MD, July 23-25, 2008.
  3. D.H. Choi and J.A. Wickert, “Inverse Dynamic Equilibrium Analysis of Mechanical Systems Undergoing Prescribed Rotational Motions,” 15th International Congress on Sound and Vibration, July 6-10, 2008, Daejeon, Korea.
  4. J.C. Collinger and J.A. Wickert, “Adaptive Piezoelectric Vibration Control With Synchronized Switching,” ASME International Mechanical Engineering Congress and Exposition, Seattle, WA, November 10-16, 2007.  IMECE 2007-41427.
  5. X.W. Tangpong, J.A. Wickert, and A. Akay, “Finite Element Model for Hysteretic Friction Damping of Traveling Wave Vibration in Axisymmetric Structures,” ASME International Mechanical Engineering Congress and Exposition, Seattle, WA, November 10-16, 2007.  IMECE 2007-41432.
  6. V. Kartik and J.A. Wickert, “Parametric Instability of a Traveling Plate Partially Supported by a Laterally Moving Foundation,” ASME International Mechanical Engineering Congress and Exposition, Seattle, WA, November 10-16, 2007.  IMECE 2007-41875.
  7. D.H. Choi, H.H. Yoo, and J.A. Wickert, “Tolerance Analysis of Dynamic Equilibria in Multibody Systems Having Prescribed Rotational Motion,” ASME International Mechanical Engineering Congress and Exposition, Seattle, WA, November 10-16, 2007.
  8. X.W. Tangpong, J.A. Wickert, and A. Akay, “Distributed Friction Damping of Traveling Wave Vibration in Rods,” ASME Biennial Vibration and Noise Conference, Las Vegas, NV, September 4-7, 2007.  IDETC 2007-34135.
  9. M.R. Brake and J.A. Wickert, “Frictional Vibration Transmission From a Laterally Moving Surface to a Traveling Beam,” ASME Biennial Vibration and Noise Conference, Las Vegas, NV, September 4-7, 2007.
  10. D.H. Choi, H.H. Yoo, and J.A. Wickert, “Sensitivity Analysis of Dynamic Equilibrium Positions in Multibody Systems Undergoing Prescribed Rotational Motions,” ASME Biennial Vibration and Noise Conference, Las Vegas, NV, September 4-7, 2007.
  11. D.H. Choi, S.J. Lee, J.A. Wickert, and H.H. Yoo, “Tolerance Analysis of a Robot Manipulator Having Uncertainties in Joint Clearance and Axis Orientation,” ASME International Conference on Multibody Systems, Nonlinear Dynamics, and Control, Las Vegas, NV, September 4-7, 2007.  IDETC 2007 34316.
  12. E. Ervin and J.A. Wickert, “Experiments on a Beam-Rigid Body Structure Repetitively Impacting a Rod,” ASME International Mechanical Engineering Congress and Exposition, Chicago, IL, November 5-10.  IMECE 2006-14799.
  13. V. Kartik and J.A. Wickert, “Surface Friction Guiding for Reduced High Frequency Lateral Vibration of Moving Media,” ASME International Mechanical Engineering Congress and Exposition, Chicago, IL, November 5-10.  IMECE 2006-14853.
  14. V. Kartik and J.A. Wickert, “Vibration and Guiding of Moving Media With Edge Weave Imperfections,” EUROMECH 484:  Wave Mechanics and Stability of Long Flexible Structures Subject to Moving Loads and Flows, Delft, The Netherlands, September 19-22, 2006.
  15. V. Kartik and J.A. Wickert, “High-Frequency Lateral Tape Motion Control Using Surface Friction Guiding,” ASME/JSME Joint Conference on Micromechatronics for Information and Precision Equipment, Santa Clara, CA, June 21-23, 2006.
  16. J.A. Wickert and J.L. Beuth, “Developing CAE Skills Through Web-Based Course Modules Across the Mechanical Engineering Undergraduate Curriculum,” ASME International Mechanical Engineering Education Conference, Beijing, China, March 31-April 4, 2006.  Invited.
  17. J.A. Wickert, “Modeling and Analysis Methods of Nonlinear Vibrations in Engineering Systems,” ASME International Mechanical Engineering Congress and Exposition, Orlando, FL, November 5-11, 2005.  Panel discussion.
  18. E. Ervin and J.A. Wickert, “Complex Impact Response of a Beam Structure Subjected to Harmonic Base Excitation,” ASME International Mechanical Engineering Congress and Exposition, Orlando, FL, November 5-11, 2005.
  19. B. Yagci, M. Iannacci, O.B. Ozdoganlar, and J.A. Wickert, “On the Repetitive Impact Dynamics of One and Two Degree of Freedom Systems,” ASME International Mechanical Engineering Congress and Exposition, Orlando, FL, November 5-11, 2005.
  20. V. Kartik and J.A. Wickert, “Vibration and Guiding of Moving Media With Edge Weave Imperfections,” ASME Biennial Vibration and Noise Conference, Long Beach, CA, September 24-28, 2005.
  21. X.W. Tangpong, Y. Karpenko, J.A. Wickert, and A. Akay, “Optimizing Distributed-Contact Friction in Ring Dampers,” ASME Biennial Vibration and Noise Conference, Long Beach, CA, September 24-28, 2005.
  22. K.J. Son, V. Kartik, J.A. Wickert, and M. Sitti, “A Piezoelectric Unimorph Actuator-Based Precision Positioning Miniature Walking Robot,” 2005 IEEE/ASME International Conference of Advanced Intelligent Mechatronics, Monterey, CA, July 24-28, 2005.
  23. M. Brake and J.A. Wickert, “Scatterwinding and Lateral Tape Motion,” ASME 15-th Conference on Information Storage and Processing, Santa Clara, CA, June 27-29, 2005.
  24. L. Xia, W. Messner, K. Venkataraman, J.A. Wickert, “Design of Active Tape Steering System for Reducing Lateral Tape Motion,” ASME 15-th Conference on Information Storage and Processing, Santa Clara, CA, June 27-29, 2005.
  25. P.M. Lin and J.A. Wickert, “Corrugation and Buckling Defects in Wound Rolls,” ASME International Mechanical Engineering Congress and Exposition, Anaheim, CA, November 14-19, 2004.
  26. J.L. Beuth, J.A. Wickert, and J. Zhou, “A Web-Based Background Curriculum in Computer-Aided Mechanical Engineering,” ASME International Mechanical Engineering Congress and Exposition, Anaheim, CA, November 14-19, 2004.
  27. J.A. Wickert and J.L. Beuth, “Web-Based Computer-Aided Engineering Tutorials Across the Mechanical Engineering Curriculum,” American Society for Engineering Education Annual Conference and Exposition, Salt Lake City, UT, June 20-23, 2004.
  28. V. Kartik and J.A. Wickert, “Experimental Characterization of Reduced Lateral Tape Motion Using Externally-Pressurized Porous Air Bearing Guides,” ASME 14-th Conference on Information Storage and Processing, Santa Clara, CA, June 14-16, 2004.
  29. M. Brake and J.A. Wickert, “Reducing Transient Arm Vibration Following Track Seeks Through Flex Circuit Re-Design,” ASME 14-th Conference on Information Storage and Processing, Santa Clara, CA, June 14-16, 2004.
  30. H. Cheng and J.A. Wickert, “Track Following Servo Dynamics and Roller Disturbances in Lateral Tape Motion Simulation,” ASME 14-th Conference on Information Storage and Processing, Santa Clara, CA, June 14-16, 2004.
  31. P.M. Lin and J.A. Wickert, “Analysis of Core Buckling Defects in Sheet Metal Coil Processing,” ASME International Mechanical Engineering Congress and Exposition, Washington, D.C., November 16-21, 2003.
  32. M. Brake and J.A. Wickert, “Optimizing Vibration Isolation of Flex Circuits,” ASME International Mechanical Engineering Congress and Exposition, Washington, D.C., November 16-21, 2003.
  33. J.A. Wickert, “Modeling and Free Vibration of Flex Circuits in Hard Disk Drives,” ASME Biennial Vibration and Noise Conference, Chicago, IL, September 2-5, 2003.
  34. M. Brake and J.A. Wickert, “Analysis and Measurement of Flex Circuit Transient Vibration,” Fourth International Symposium on Vibration of Continuous Systems, Keswick, Lake District, England, July 7-11, 2003.
  35. J.A. Wickert, “Vibration of Flex Circuits in Hard Disk Drives,” Symposium on Structural Dynamics and Stability, 39-th Annual Technical Meeting of the Society of Engineering Science, State College, PA, October 13-16, 2002.
  36. M. Brake and J.A. Wickert, “Flex Cable Dynamics and Servo Implications,” ASME Thirteenth Information Storage and Processing Symposium, Santa Clara, CA, June 17-18, 2002.
  37. T. Machida and J.A. Wickert, “Lateral Tape Motion Dynamics and Simulation,” ASME Thirteenth Information Storage and Processing Symposium, Santa Clara, CA, June 17-18, 2002.
  38. J.Y. Chang and J.A. Wickert, “Measurement and Analysis of Modulated Doublet Mode Response in Mock Bladed Disks,” ASME Biennial Vibration and Noise Conference, Pittsburgh, PA, September 9-12, 2001.
  39. T. Machida and J.A. Wickert, “Magnetic Tape Path Guiding Simulation,” ASME Twelfth Symposium on Information Storage and Processing Systems, Santa Clara, CA, June 28-29, 2001.
  40. J.Y. Chang and J.A. Wickert, “On the Response of Modulated Doublet Modes to Traveling Wave Excitation,” Symposium on the Vibration and Control of Continuous Systems, DE-Vol. 107, pp 1-10, ASME Winter Annual Meeting, Orlando, FL, November 5-11, 2000.
  41. J.A. Wickert, “Challenges in Tape Transport and Cartridge Mechanics,” Magnetic Tape Storage Workshop (invited), ASME Eleventh Symposium on Information Storage and Processing Systems, Santa Clara, CA, June 21-23, 2000.
  42. Y.M. Lee and J.A. Wickert, “Finite Width Model for Magnetic Tape Pack Stresses,” ASME Eleventh Symposium on Information Storage and Processing Systems, Santa Clara, CA, June 21-23, 2000.
  43. H.A. Kim, M.A. Allen, D.H. Ditto, R.P. Kruse, and J.A. Wickert, “Development Process to Optimize and Quantify Effectiveness of Differential Crowning for Noise Reduction in Drivetrains,” ASME International Power Transmission and Gearing Conference, September 10-13, 2000, Baltimore, MD.
  44. J.A. Wickert, “Three-Dimensional Vibration of Disks and Cylinders,” International Workshop on the Analysis of Vibrating Systems, Canmore, Alberta, Canada, September 26-28, 1999.
  45. J. Bae and J.A. Wickert, “Free Vibration of Coupled Disk-Hat Structures,” ASME Biennial Vibration and Noise Conference, Las Vegas, NV, September 12-15, 1999.  CD-ROM Proceedings of the Design Engineering Technical Conferences, VIB-8158.
  46. K.I. Tzou, J.A. Wickert, and A. Akay, “Frequency Clusters in the Spectrum of Annular Cylinders,” ASME Biennial Vibration and Noise Conference, Las Vegas, NV, September 12-15, 1999. CD-ROM Proceedings of the Design Engineering Technical Conferences, VIB-8153.
  47. J.A. Wickert, “Remarks on the Three-Dimensional Vibration of Disks and Cylinders,” Second International Symposium on the Vibration of Continuous Systems, Grindelwald, Switzerland, July 12-16, 1999.
  48. M. Keshavan, Y.M. Lee, and J.A. Wickert, “Mechanics of Magnetic Tape Pack Formation,” ASME Tenth Symposium on Information Storage and Processing Systems, Santa Clara, CA, June 28-30, 1999.
  49. H.A. Kim, M.A. Allen, D.H. Ditto, and J.A. Wickert, “Gear Noise Characterization and Reduction in Drivetrain Systems,” SAE International Congress and Exposition, Detroit, Michigan, March 1-4, 1999.  SAE Paper 1999-01-1051.
  50. M.B. Keshavan and J.A. Wickert, “Transient Discharge of Entrained Air From a Wound Roll,” ASME Winter Annual Meeting, Anaheim, CA, November 15-20, 1998.  ISPS-Vol. 4 Advances in Information Storage and Processing Systems, pp 41-50.
  51. M.B. Keshavan and J.A. Wickert, “Effects of Surface Morphology on Air Entrainment During Web Winding,” ASME Winter Annual Meeting, Dallas, TX, November 18-22, 1997.
  52. J.A. Wickert and A. Akay, “Vibration of Disk Brake Rotors,” 1997 SAE Brake Colloquium, Phoenix, AZ, October 5-8, 1997.
  53. M. Kim, J. Moon, and J.A. Wickert, “Spatial Modulation of Repeated Vibration Modes in Rotationally Periodic Structures,” ASME Biennial Vibration and Noise Conference, Sacramento, CA, September 14-17, 1997.  CD-ROM Proceedings of the Design Engineering Technical Conferences, VIB-4088, pp 1-10.
  54. K.I. Tzou, J.A. Wickert, and A. Akay, “In-Plane Vibration Modes of Arbitrarily Thick Disks,” ASME Biennial Vibration and Noise Conference, Sacramento, CA, September 14-17, 1997.  CD-ROM Proceedings of the Design Engineering Technical Conferences, VIB-4086, pp 1-9.
  55. J. Tseng and J.A. Wickert, “Nonconservative Stability of a Friction Loaded Disk,” ASME Biennial Vibration and Noise Conference, Sacramento, CA, September 14-17, 1997.  CD-ROM Proceedings of the Design Engineering Technical Conferences, VIB-4087, pp 1-11.
  56. M. Kim, J. Moon, and J.A. Wickert, “Spatially Modulated Vibration Modes in Rotationally Periodic Continuous Systems,” International Symposium on the Vibration of Continuous Systems, Estes Park, CO, August 11-15, 1997.  Vibrations of Continuous Systems, pp 87-89.
  57. J.A. Wickert, “Improving Web Transport Dynamics in Manufacturing Environments,” NSF Design and Manufacturing Grantees Conference, Seattle, WA, January 8-10, 1997.
  58. A.V. Lakshmikumaran and J.A. Wickert, “Wrinkling of Webs With Laterally Offset Guides,” Fifth Pan American Congress of Applied Mechanics, San Juan, Puerto Rico, January 2-4, 1997.  Applied Mechanics in the Americas, Vol. IV, pp 341-344.
  59. M. Keshavan and J.A. Wickert, “Experimental Characterization of Air Entrainment During High Speed Web Winding,” ASME Winter Annual Meeting, Atlanta, GA, November 17-22, 1996.  ISPS-Vol. 2 Advances in Information Storage and Processing Systems, pp 31-38.
  60. C. Celik, A. Akay, and J.A. Wickert, “Friction-Vibration Interaction in Disk Brake Systems,” 1996 SAE Brake Colloquium, New Orleans, LA, September 17-22, 1996.
  61. K. Tzou, J.A. Wickert, and A. Akay, “Role of In-Plane Modes in Generating Disk Brake Squeal,” 1996 SAE Brake Colloquium, New Orleans, LA, September 17-22, 1996.
  62. K. Tzou, J.A. Wickert, and A. Akay, “Vibration and Noise Implications of In-Plane Rotor Vibration Modes,” 1995 SAE Brake Colloquium, Philadelphia, PA, October 1-4, 1995.
  63. M. Francisco, A. Akay, and J.A. Wickert, “Role of Mode Lock-In in Generating Brake Noise,” 1995 SAE Brake Colloquium, Philadelphia, PA, October 1-4, 1995.
  64. A.V. Lakshmikumaran and J.A. Wickert, “Edge Buckling of Imperfectly Guided Webs,” ASME Winter Annual Meeting, San Francisco, CA, November 12-17, 1995.  ISPS-Vol. 1 Advances in Information Storage and Processing Systems, pp 319-327.
  65. W. Fang and J.A. Wickert, “Determining Mean and Gradient Residual Stresses in Thin Films Using Micromachined Cantilevers,” ASME Winter Annual Meeting, San Francisco, CA, November 12-17, 1995.  ISPS-Vol. 1 Advances in Information Storage and Processing Systems, pp 167-175.
  66. J.A. Wickert, “Transient Vibration of Gyroscopic Systems With Unsteady Superposed Motion,” ASME Biennial Vibration and Noise Conference, Boston, MA, September 19-23, 1995.  DE-Vol. 84 Design Engineering Technical Conference Proceedings, pp 1435-1442.
  67. J. Tseng and J.A. Wickert, “Split Vibration Modes in Acoustically-Coupled Disk Stacks,” ASME Biennial Vibration and Noise Conference, Boston, MA, September 19-23, 1995.  DE-Vol. 84 Design Engineering Technical Conference Proceedings, pp 839-846.
  68. J.A. Wickert and A. Akay, “Capstone Design-From-Research Projects in Mechanical Engineering,” 1995 ASEE Annual Conference and Exposition, Anaheim, CA, June 25-28, 1995.
  69. J.G. Tseng and J.A. Wickert, “On the Vibration of Bolted Plate and Flange Assemblies,” Fourth Pan American Congress of Applied Mechanics, Buenos Aires, Argentina, January 3-6, 1995.  Applied Mechanics in the Americas, Vol. II, pp 153-158.
  70. W. Fang and J.A. Wickert, “Response of a Periodically Driven Impact Oscillator,” Fourth Pan American Congress of Applied Mechanics, Buenos Aires, Argentina, January 3-6, 1995.  Applied Mechanics in the Americas, Vol. II, pp 184-189.
  71. W. Fang and J.A. Wickert, “Measurement of Thin Film Stress Using Bi-Material Micromachined Beams,” Fourth Pan American Congress of Applied Mechanics, Buenos Aires, Argentina, January 3-6, 1995.  Applied Mechanics in the Americas, Vol. I, pp 491-496.
  72. A.V. Lakshmikumaran and J.A. Wickert, “Equilibrium Analysis of Finite Width Foil Bearings,” ASME Winter Annual Meeting, Chicago, IL, November 6-11, 1994.
  73. J.H. Griffin, W.T. Wu, J.A. Wickert, and J.B. Brown, Jr., “Torsional Vibration of Drive Trains,” SAE International Off Highway and Powerplant Congress and Exposition, Milwaukee, WI, September 12-14, 1994.  SAE Technical Paper 941697.
  74. W. Fang and J.A. Wickert, “Post-buckling of Micromachined Beams,” Seventh IEEE International Workshop on MEMS, Kanagawa, Japan, January 25-28, 1994.  Conference Proceedings, pp 182-187.
  75. J.A. Wickert, “Analysis of Self-Excited Longitudinal Vibration of a Moving Tape,” ASME 14-th Biennial Vibration and Noise Conference, Albuquerque, NM, September 19-22, 1993.  DE-Vol. 61 Vibration and Control of Mechanical Systems, pp 87-93.
  76. J.G. Tseng and J.A. Wickert, “Vibration of an Eccentrically Clamped Annular Plate,” ASME 14-th Biennial Vibration and Noise Conference, Albuquerque, NM, September 19-22, 1993.  DE-Vol. 63 Vibrations of Mechanical Systems, pp 57-64.
  77. A.V. Lakshmikumaran and J.A. Wickert, “On the Vibration of Coupled Traveling String and Air Bearing Systems,” ASME Winter Annual Meeting, New Orleans, LA, November 28-December 3, 1993.
  78. J.A. Wickert, “Free Linear Vibration of Self-Pressurized Foil Bearings,” ASME Winter Annual Meeting, Atlanta, GA, December 1-6, 1991.
  79. J.A. Wickert, “Non-linear Vibration of a Traveling Tensioned Beam,” ASME 13-th Biennial Vibration and Noise Conference, Miami, FL, September 22-25, 1991.
  80. J.A. Wickert, “Concepts in Contact Recording,” STLE/ASME Tribology Conference, St. Louis, MO, October 13-16, 1991.  Panel discussion.
  81. J.A. Wickert, D.N. Lambeth, and W. Fang, “Towards a Micromachined Dual Slider and Suspension Assembly for Contact Recording,” STLE/ASME Tribology Conference, St. Louis, MO, October 13-16, 1991.
  82. J.A. Wickert and C.D. Mote, Jr., “Traveling Load Response of an Axially-Moving String,” Second Pan American Congress of Applied Mechanics, Valparaiso, Chile, January 2-4, 1991.
  83. J.A. Wickert and C.D. Mote, Jr., “Classical Vibration Analysis of Axially-Moving Continua,” ASME Applied Mechanics and Engineering Sciences Conference, Berkeley, CA, June 20-22, 1988.
  84. J.A. Wickert and C.D. Mote, Jr., “Vibration and Stability of Axially-Moving Materials,” International Conference on Axially-Moving Materials, Tampere, Finland, April 4-5, 1987.

To top